DQ-630/1200/2500 Conductor Resistance Clamp

Conductor Resistance Fixture is suitable for all kinds of conductor resistance measurement.It is used with QJ36,QJ44,DJ57 and other resistance measuring instrument.Meets IEC60468 standard.

ສົ່ງອີເມວຫາພວກເຮົາ Download as PDF

ລາຍລະອຽດຜະລິດຕະພັນ

ປ້າຍກຳກັບສິນຄ້າ

ລາຍລະອຽດຜະລິດຕະພັນ

Conductor Resistance Fixture is suitable for all kinds of conductor resistance measurement. It is used with QJ36, QJ44, DJ57, and other resistance-measuring instruments. Meets IEC60468 standard.

DQ-630 Technical Parameter

1. Current terminal shape: right angle type
2. Potential terminal shape: right angle knife and fork shape
3. Aluminum alloy bottom plate, one end is tensioned
4. Current terminal clamping length: 45mm
5. Distance between current and potential terminals: 75 ~ 135mm
6. Measuring wire length: 1000mm
7. Max. sample cross-section area: 630mm²
8. Appearance size(mm): 1650(L) x 150(W) x 130(H)

DQ-1200 Technical Parameter

1. Current terminal shape: right angle type
2. Voltage terminal shape: right angle knife and fork shape
3. Aluminum alloy bottom plate, one end is tensioned
4. Distance between current and potential terminals: 75 ~ 200mm
5. Clamping height: 40mm
6. Opening width: 40mm
7. Current terminal clamping length: 46mm
8. Measuring wire length: 1000mm
9. Max. sample cross-section area: 1200mm²
10. Appearance size(mm): 1700(L) x 180(W) x 150(H)

DQ-2500 Technical Parameter

Current terminal shape: right angle type
2. Voltage terminal shape: right angle knife and fork shape
3. Aluminum alloy bottom plate, one end is tensioned.
4. Distance between current and potential terminals: 95 ~ 300mm
5. Clamping height: 60mm
6. Opening width: 60mm
7. Current terminal clamping length: 46mm
8. Measuring wire length: 1000mm
9. Max.sample cross-section area: 2500mm²
10. Appearance size(mm): 1750(L) x 310(W) x 180(H)
ປະຫວັດບໍລິສັດ
Hebei Fangyuan Instrument Equipment Co., Ltd. ໄດ້ສ້າງຕັ້ງຂຶ້ນໃນ 2007 ແລະເປັນວິສາຫະກິດເຕັກໂນໂລຊີສູງຊ່ຽວຊານ R & D, ການຜະລິດ, ການຂາຍແລະການບໍລິການອຸປະກອນການທົດສອບ.There ມີຫຼາຍກ່ວາ 50 ພະນັກງານ, ທີມງານ R & D ມືອາຊີບປະກອບດ້ວຍທ່ານຫມໍແລະວິສະວະກອນແລະ. ນັກວິຊາການດ້ານວິສະວະກໍາ. ພວກເຮົາສ່ວນໃຫຍ່ແມ່ນມີສ່ວນຮ່ວມໃນການພັດທະນາແລະການຜະລິດອຸປະກອນການທົດສອບສໍາລັບສາຍແລະສາຍເຄເບີ້ນແລະວັດຖຸດິບ, ການຫຸ້ມຫໍ່ພາດສະຕິກ, ຜະລິດຕະພັນໄຟໄຫມ້ແລະອຸດສາຫະກໍາອື່ນໆທີ່ກ່ຽວຂ້ອງ. ພວກເຮົາຜະລິດຫຼາຍກວ່າ 3,000 ຊຸດຂອງອຸປະກອນການທົດສອບຕ່າງໆຕໍ່ປີ. ຜະລິດຕະພັນໄດ້ຖືກຂາຍໃຫ້ຫຼາຍສິບປະເທດເຊັ່ນ: ສະຫະລັດ, ສິງກະໂປ, ເດນມາກ, ລັດເຊຍ, ຟິນແລນ, ອິນເດຍ, ໄທແລະອື່ນໆ.