XLB-350S Flat Vulcanizing Machine (Water Cooled)

This machine is suitable for the vulcanization of various rubber and plastic products, and is also widely used in the compression molding of solid plastics, foams, building decoration and decorative products.

Maelezo ya Bidhaa

Lebo za Bidhaa

Maelezo ya bidhaa

This machine is suitable for the vulcanization of various rubber and plastic products, and is also widely used in the compression molding of solid plastics, foams, building decoration and decorative products. It has perfect functions and compact structure. Automatic temperature control, alarm, manual mold opening, automatic pressure compensation and timing.

Kigezo cha Kiufundi

1.Nominal clamping force:40T

2.Maximum pressure of working fluid:16 Mpa

3.Specification of vulcanized plate:350(mm) x 350(mm) x 2 pieces

4.Cooling plate specifications:350(mm) x 350(mm) x 2 pieces

5.Sample template specifications:1mm (standard) 2mm,3mm(optional)

6.Plunger stroke:250mm

7.Plunger rising speed:14mm/s

8.Plunger descent speed:12mm/s

9.Heating method:electric heating

10.Cooling method:water

11.Maximum working temperature:260 degrees

12.Power of main motor:3kW

13.Unit total power:9.4kW

14.Weight:800kg

15.Dimension (mm):1450(L) x 650(W) x 1450(H)

16.User-supplied No. 46 hydraulic oil 50 liters

Wasifu wa Kampuni

Hebei Fangyuan Ala Equipment Co., Ltd ilianzishwa mwaka 2007 na ni biashara ya teknolojia ya juu inayobobea katika R&D, uzalishaji, mauzo na huduma ya vifaa vya upimaji. Kuna zaidi ya wafanyikazi 50, timu ya kitaalamu ya R&D inayoundwa na madaktari na wahandisi na mafundi wa uhandisi. Sisi ni hasa wanaohusika katika maendeleo na uzalishaji wa vifaa vya kupima kwa waya na cable na malighafi, ufungaji wa plastiki, bidhaa za moto na viwanda vingine vinavyohusiana. Tunazalisha seti zaidi ya 3,000 za vifaa mbalimbali vya kupima kila mwaka. Bidhaa sasa zinauzwa kwa nchi kadhaa kama vile Marekani, Singapore, Denmark, Urusi, Finland, India, Thailand na kadhalika.

RFQ

Swali: Je, unakubali huduma ya ubinafsishaji?

A: Ndiyo. Hatuwezi tu kutoa mashine za kawaida, lakini pia mashine zisizo za kawaida za kupima kulingana na mahitaji yako. Na pia tunaweza kuweka nembo yako kwenye mashine kumaanisha tunatoa huduma ya OEM na ODM.

Swali: Kifungashio ni nini?

A: Kwa kawaida, mashine zimejaa sanduku la mbao. Kwa mashine ndogo na vipengele, zimefungwa na carton.

Swali: Muda wa utoaji ni nini?

J: Kwa mashine zetu za kawaida, tuna hisa kwenye ghala. Ikiwa hakuna hisa, kwa kawaida, muda wa kujifungua ni siku 15-20 za kazi baada ya kupokea amana ( hii ni kwa mashine zetu za kawaida tu). Ikiwa unahitaji haraka, tutafanya utaratibu maalum kwa ajili yako.

Ikiwa una nia ya bidhaa zetu, unaweza kuchagua kuacha maelezo yako hapa, na tutawasiliana nawe baada ya muda mfupi.

Andika ujumbe wako hapa na ututumie

Aina za bidhaa