FYCS-Z sim we kabel bilen ýakylýan ýanýan synag enjamlary (köpçülikleýin akym gözegçiligi)

Baglanan simleri we kabeli ýa-da optiki kabeli dikligine oturtmagyň kesgitlenen şertlerde dik alawy basyp ýatyrmak ukybyna baha bermek üçin amatlydyr.

GB18380.31-2022 "ameangyn şertlerinde kabelleriň ýanmak synagy 3-nji bölüm: IEC60332-3-10: 2000 ekwiwalentine birikdirilen simleri we kabel alawyny dik ýaýratmak synag enjamyny dikligine gurnamak".

Şol bir wagtyň özünde, GB / T19666-2019 4-nji tablisanyň talaplaryny kanagatlandyrmak üçin "ameangyn saklaýjy we refrakter sim we kabel" standartlary.

GB / T18380

GB / T18380.

GB / T18380.

GB / T18380.

Busangyç synag kamerasy, elektrik dolandyryş ulgamy, howa çeşmesi, ot alma çeşmesiniň köpçülikleýin akymyna gözegçilik ulgamy (propan gazy we howa gysylan gaz), polat merdiwan, ýangyn söndüriji enjam, zyňyndy arassalaýjy enjam we ş.m.

1.Working voltage: AC 220V±10% 50Hz,Power consumption: 2KW

2.The inlet and outlet air flow rate: 5000±200 L/min(adjustable)

3. Howa akymy we propan akymy köpçülikleýin akym dolandyryş ulgamy tarapyndan dolandyrylýar.

4. Howa çeşmesi: propan (0.1Mpa), howa (0.1Mpa), müşderi eýeçiligindäki howa çeşmesi.

5. Wagt aralygy: 0 ~ 60min (sazlap bolýar)

6.Anemometer measurement range: 0 ~ 30m/s, measurement accuracy: ±0.2m/s

7. Synag kamerasynyň ölçegi (mm): 2184 (L) x 1156 (W) x 5213 (H)

Mineral ýangyna çydamly izolýasiýa gaýa ýüň materialy bilen dolduryldy, ýokarsy 1500 mm ýokary goragly.

Wenturi mikseri bilen 8.2 ýangyç kellesi

9. Howa giriş fanaty pes sesli worteks janköýeridir. PLC ýygylyk öwrüjisiniň üsti bilen janköýeriň tizligini dolandyrýar we worteks akym ölçeýjisi howa giriş sesiniň takyk gözegçiligini gazanmak üçin howa göwrümini ölçýär.

10.Höweslendiriji janköýer, howa göwrümi 5000m bolan 4-72 poslama garşy fanaty kabul edýär²/ sag.

11. ueangyç gazyndan soňky arassalaýyş, 5000 m gaýtadan işleýän howa pürküji tozan aýyrmak diňi bilen enjamlaşdyrylandyr²/ sag

12. Iki azotly ýangyn söndüriji we suw sepýän ýangyn söndüriji usullar müşderileriň saýlamagy üçin enjamlaşdyrylandyr.

13. Synag üçin:

Dik standart polat merdiwan ölçegi (mm): 500 (W) x 3500 (H)

Dik giň polat merdiwan ölçegi (mm): 800 (W) x 3500 (H)

14. tionangynyň üstki ölçegi (mm): 257 (L) x 4.5 (W)

15. Ekrana gözegçilik, duýgur we düşnükli, elektron otlamak, awtomatiki wagt.

16. Ot ýakýan enjam PLC tarapyndan dolandyrylýar we sensor ekrany bilen dolandyrylýar.

Test box: The experimental device should be a self-standing box with a width of 1000mm, a depth of 2000mm and a height of 4000mm. The bottom of the box should be 300mm above the ground. The perimeter of the test chamber should be sealed, the air from the bottom of the chamber from the front wall (150±10) mm to open a (800±20) mm x (400±10) mm air inlet into the box. A (300±30) mm x (1000±100) mm outlet should be opened at the back of the top of the chamber. Test chamber should be used on both sides of the heat transfer coefficient of about 0.7W.m-2.K-1 thermal insulation, the distance between the steel ladder and the back wall of the test chamber is (150±10) mm, and the bottom rung of the steel ladder is (400±5) mm from the ground. The lowest point of the cable sample is about 100mm from the ground.

• 

   Standard Venturi Blowtorch

• 

   Blowtorch deşik

• 

  Ot ýakýan 

• 

  Wenturi mikser

1.Anemometr: synag kamerasynyň ýokarsyndaky ýeliň tizligini ölçär, eger ýeliň tizligi 8m / s-den geçse, synag geçirilip bilinmez.

2.Temperatura barlagy: synag gutusynyň iki gapdalynda iki sany K görnüşli termokupl bar, içki diwaryň temperaturasy 5 than-dan pes ýa-da 40 than-dan ýokary bolsa, synag geçirilip bilinmez.

3.Air source: adopt touch screen controller, frequency conversion control inlet axial flow fan, can intuitively read out and control the gas flow through the air box for (5000±200) L/min, stable air flow rate during the test.

4. Synag tamamlanandan soň: ody bir sagat saklandan soňam ýanýan bolsa, ýangyny zor bilen duruzmak üçin suw sepiji enjam ýa-da azot ýangyn söndüriji enjam ulanylyp bilner we arassalamak üçin ýörite bir mazmun bar galyndylar.

5.Steel ladder type: width (500±5)mm standard steel ladder, width (800±10)mm wide steel ladder, material for SUS304 stainless steel tube.

Adaty we giň polat merdiwanlar üçin biri

Tüsse ýygnamak we ýuwujy enjam: diametri 1500mm we beýikligi 3500mm bolan PP materialy. Tüsse ýygnamak diňi üç bölege bölünýär: pürküji enjam, tüsse we tozan süzgüç enjamy we tüsse çykaryjy enjam. Spreý enjamy: ýörite süzgüç materiallary üçin suw spreýini üpjün etmek, tüsse we tozany süzmek üçin ýörite süzgüç materiallaryny saklamak. Tüsse we tozan süzgüç enjamy: Tüsse we tozany netijeli süzüp bilýän suw süzgüçli material bilen süzülýär, çykýan tüsse ak tüsse bolar. Müşderiler ýagdaýa görä daşky gurşawy goramak enjamlaryny goşýarlar.

• 

  Tüsse ýygnamak diňiniň shemasy

• 

  Tüsse ýygnamak diňi

• 

  Höweslendiriji janköýer

1.Ignition source type: including one or two band-type propane gas blowtorches and their matching flowmeters and Venturi mixers. The ignition surface is drilled with 242 flat metal plates with a diameter of 1.32mm. The center distance of these holes is 3.2mm, arranged in three rows in a staggered arrangement, each row is 81, 80 and 81, distributed in the nominal size is 257×4.5mm. In addition, a row of small holes are opened on both sides of the flame board, and this guide hole can maintain the stable combustion of the flame.

2.Ignition source location: The torch should be placed horizontally, (75±5) mm from the front surface of the cable sample, (600±5) mm from the bottom of the test chamber, and symmetrical to the axis of the steel ladder. The flame supply point of the blowtorch should be located in the center between the two crossbeams of the steel ladder, and at least 500mm away from the lower end of the sample. The center line of the blowtorch system should be approximately the same as the center line of the steel ladder.

• 

  Worteks akym ölçegleri
  Giriş howasynyň göwrümine takyk gözegçilik

• 

  Worteks howa giriş fanaty

Massa akymyny dolandyryjy, gazyň köpçülikleýin akymyny takyk ölçemek we gözegçilikde saklamak üçin ulanylýar. Köpçülikleýin akym ölçegleri ýokary takyklyk, gowy gaýtalanmak, çalt jogap bermek, ýumşak başlangyç, durnuklylyk we ygtybarlylyk, giň iş basyşy diapazonyna eýe. Halkara standart birleşdirijiler bilen işlemek we ulanmak aňsat, islendik ýagdaýda gurlup bilner we awtomatiki dolandyryş üçin kompýuter bilen birikmek aňsat.

Köpçülikleýin akym gözegçisiniň tehniki parametrleri:

1.Accuracy: ±2% F.S

2.Linearity：±1% F.S

3.Repeat accuracy：±0.2% F.S

4.Response time：1 ~ 4 sec

5. Basyşa garşylyk: 3 Mpa

6.Working environment：5 ~ 45℃

7. Giriş modeli: 0- + 5v