FY-NHZ Taputapu Whakamatau Ahu Ahi Tauira Uira (Mass Rere Controller)

It is a test equipment used for cables or optical cables required to maintain the integrity of the line in a separate fire test using a flame (controlled heat output) at a temperature of not less than 750°C. Comply with BS6387, BS8491, IEC60331-2009 and other standards.

1.Teihana whakamatautau: 1 teihana, kotahi tauira mo ia whakamatautau. Rahi tauira: roa>1200mm.

2.Torch: Rarama hau propane here me te whakaranu venturi me te 500 mm te roa nozzle ingoa.

3.Gas flow range: 0 ~ 50L/min(adjustable)  Gas flow accuracy:0.1L/min

4.Air flow range: 0 ~ 200L/min(adjustable)  Air flow accuracy:5L/min

5.Power supply voltage: AC380V±10%, 50Hz, three-phase five-wire

6.Ma te whakamahi i te puna hau: LPG, propane ranei, hau pupuhi

7.Flame temperature: 450° ~ 950°(adjustable)

8.Temperature sensing pūnaha: 2 kowiri tira K-momo thermocouples, pāmahana ātete o 1100 nekehanga.

9.Mana whakahaere: 3kW

10.Whakahaerehia te papa whakamatautau ma te mana PLC, te mahi mata pa, te watea me te mohio.

11.Te mita rere o te hau: te whakamahi i te kaiwhakahaere rerenga papatipu.

12.Ko te aratau poto: Ko tenei taputapu ka huri i te tikanga o mua mo te whakamahi i te fuse, me te tango i tetahi momo momo wehenga ara iahiko hou, e whakaora ana i te huarahi whakararu o te whakakapi i te hiko i ia wa.

13.Kei te taha o te chassis te punaha whakangao, ka taea te whakapau kaha me te tere o te hau, ka taea te whakarite i te ihirangi o te hāora i roto i te pouaka i te wa o te whakamatautau me te pai ake o nga hua whakamatautau.

14.Ko te taputapu rapu haere tonu: I te wa o te whakamatautau, ka tukuna te naianei ki roto i nga waahanga katoa o te taura, a ko nga huringa-waahanga kotahi e toru he nui te kaha ki te pupuri i te nui o te rerenga e whakaaetia ana i te ngaohiko whakamatautau. Honoa he rama ki ia waea matua i tera pito o te taura, ka utaina he ia tata ki te 0.11A i te ngaohiko whakatau o te taura. Ina poto/tuwherahia te tauira i te wa o te whakamatautau, ka puta nga tohu katoa.

15. Kei roto i nga taputapu nga taputapu tiaki haumaru e whai ake nei: te nui o te kaha o te hiko, te tiaki iahiko poto, te tiaki i te mana whakahaere.

1.The equipment test is carried out in a 3 x 3 x 3(m) combustion chamber (customer-supplied), the chamber has the facility to exclude any gas produced by combustion, and there is sufficient ventilation to maintain the flame during the test.

2.Te taiao whakamatautau: me mau tonu te pāmahana ambient o waho o te ruma i waenga i te 5 ℃ me te 40 ℃.

• 

  Kaiwhati iahiko

• 

  Taiwhanga Whakawera Whakawera

Kaiwhakahaere Rere Papatipu

Ka whakamahia te kaiwhakahaere rere papatipu mo te ine tika me te whakahaere i te rere papatipu o te hau. Ko nga mita rere papatipu he tino tika, he pai te whakahoki, he tere te whakautu, he tiimata ngawari, he pumau me te pono, he whanui te awhe pehanga whakahaere. Ki nga hononga paerewa o te ao, he ngawari ki te whakahaere me te whakamahi, ka taea te whakauru ki tetahi waahi, me te ngawari ki te hono atu ki te rorohiko mo te whakahaere aunoa.

Tawhā hangarau pūmana rere papatipu:

1.Accuracy: ±2% F.S

2.Linearity：±1% F.S

3.Repeat accuracy：±0.2% F.S

4.Response time：1 ~ 4 sec

5.Pressure resistance: 3 Mpa

6.Working environment：5 ~ 45℃

7.Tauira whakauru: 0-+5v

Ko nga whakaritenga mahi a te kaiwhakamatau, tae atu ki te waahanga whakamatautau ahi (B, taura, aho ranei, te taura muka, te ahorangi ahorangi, te kaiwhakamaori pararihi), te wai rehu wai whakamatautau ahi me te whakamatautau ahi miihini, e pa ana ki nga taura kohuke kohuke me te ngaohiko whakatau kaore e neke atu i te 450 / 750V, i raro i nga tikanga mura mo te wa roa ki te pupuri i te tapatahi o te ara iahiko.

E tutuki ana ki te paerewa taura BS6387 "Whakaritenga Whakaritenga Mahi mo nga Tauera hei pupuri i te tika o te waahi i te wa o te ahi".

1.Putake wera: he 610 mm te roa o te mura o te mura o te ahi ka taea te toha ki te tuku hau.

2. Te inenga o te pāmahana: ka whakanohohia he inemahana pukupuku 2mm te diameter ki te taha o te kokoru hau, whakarara ki te mura me te 75 mm i runga ake.

3.Water rehu: he upoko rehu kei runga i te turanga whakamatautau, kei waenganui ano hoki o te kaitahu. Ko te pehanga wai ko 250KPa ki te 350KPa, rehu 0.25L/m² ki te 0.30L/m² o te wai e tata ana ki te tauira. Me ine tenei reiti ki te paepae he nui te hohonu kia taea ai te whakarara o tana tuaka roa ki te tuaka o te taura ka tuu ki waenganui. Ko tenei paepae he 100 mm te whanui me te 400 mm te roa (kei te whakaatu te taputapu i raro nei).

Pūrere whakamātautau ātete ahi me te wai:

Pūrere Wiri:

The vibration device is a low carbon steel rod (25mm in diameter and 600mm in length). The longitudinal section of the rod is parallel to the wall and 200mm above the top of the wall. A shaft divides it into two parts of 200 mm and 400 mm, and the long part faces the wall. Falling from the inclined position to the middle position of the wall from 60°C separated by 30±2s.

Pūrere Whakamātautau Rehu wai me te Pūrere Whakamātautau Rere Wai:

1.Water rehu: hono te paipa whakamatautau, kia mohio kaore he raruraru o te hononga, pehia te rehu wai ki te timata, te whakatika a-ringa i te ture rere wai "Whakatika 2" (ko tenei rere ko te 0-1.4LPM awhe) i runga i te nui röpü o te rūnanga mahi kia eke ki te rerenga tono whakamatautau.

2.Water jet: Whakauruhia te pupuhi rehu e whakamahia ana mo te whakamatautau, kia mohio kaore he raruraru o te hononga, pehia te jet wai ki te timata, te whakatika a ringa i te ture rere wai "Whakatika 1" (ko tenei rerenga ko te 2-18LPM awhe) i runga i te röpü nui o te rūnanga mahi kia tae ki te rere tono whakamatautau.

3. Ko te mahi o te paatene whakawhiti wai ka taapirihia ki te kaupapa: kati te paera whakauru wai me te pehi i te paatene whakawhiti wai ki te whakaheke i te toenga o te wai i roto i te paipa. Mena karekau te miihini e mahi i te takurua, ka tūtohu kia tangohia te hononga paipa me te pehi i te pana tuku wai hei tuku i te toenga wai i roto i te ine rerenga kia kore ai e tio te taputapu.