FYCS-Z Uaea ma Uaea Fu'u Su'e Meafaigaluega (Pule Faasao)

E fetaui lelei mo le iloiloina o le gafatia o le faʻapipiʻiina i luga ole uaea faʻapipiʻi ma le uaea poʻo le uaea opitika e taofia ai le sosolo i luga o le afi i lalo o tulaga faʻapitoa.

Fa'ata'ita'iga GB18380.31-2022 "Su'ega fa'avevelaina o uaea i lalo o tulaga mumu Vaega 3: Fa'apipi'i tu'usa'o o le uaea fa'apipi'i ma le afi fa'ata'atia fa'ata'ita'iga masini su'ega", e tutusa ma le IEC60332-3-10:2000.

I le taimi lava e tasi e faʻamalieina manaʻoga o le Laulau 4 o GB / T19666-2019 "Mataʻiala Lautele o le Flame Retardant ma Refractory Wire ma Cable" tulaga.

GB/T18380.32--2022/IEC60332--3--21: 2015 "Su'ega afi o uaea eletise ma uaea opitika i lalo o tulaga afi Vaega 32: Uaea fa'apipi'i tu'usa'o ma uaea mumu fa'asalalau fa'ata'atia su'ega AF/R vaega".

GB/T18380.33--2022/IEC60332--3--22: 2015 "Su'ega afi o uaea eletise ma uaea opitika i lalo o tulaga afi Vaega 33: Uaea fa'apipi'i tu'usa'o ma uaea mumu fa'asalalau fa'ata'atia le vaega A".

GB/T18380.35--2022/IEC60332--3--24:2015 "Su'ega afi o uaea eletise ma uaea mata i lalo o tulaga afi Vaega 35: Uaea fa'apipi'i tu'u sa'o ma uaea mumu fa'asalalau tu'usa'o vaega ole su'ega C",

GB/T18380.36--2022/IEC60332--3--25: 2015 "Su'ega afi o uaea eletise ma uaea opitika i lalo o tulaga afi Vaega 36: Uaea fa'apipi'i tu'usa'o ma uaea mumu fa'asalalau fa'asalalau vaega D".

Su'e su'ega potu, faiga fa'aeletise, puna ea, fa'apogai puna fa'amama fa'amama fa'atonu faiga (propane kesi ma ea compressed kasa), apefa'i u'amea, masini tineia afi, fa'amamāina masini, ma isi.

1.Working voltage: AC 220V±10% 50Hz,Power consumption: 2KW

2.The inlet and outlet air flow rate: 5000±200 L/min(adjustable)

3.Ea tafe ma propane tafe o loʻo pulea e le faʻaogaina o le faʻaogaina o le faʻaogaina o le tele.

4.Ea puna: propane (0.1Mpa), ea (0.1Mpa), tagata e umia ea punaoa.

5. Taimi taimi: 0 ~ 60min(e mafai ona seti)

6.Anemometer measurement range: 0 ~ 30m/s, measurement accuracy: ±0.2m/s

7. Tele potu su'ega (mm): 2184(L) x 1156(W) x 5213(H)

Faatumu i minerale fa'aluma afi fa'alumaina mea papa fulufulu mamoe, pito i luga ma le 1500mm maualuga puipui puipui.

8.2 fa'aulu ulu sulu fa'atasi ma le fa'afefiloi Venturi

9.O le ili inlet ea o se ili vortex maualalo leo. E pulea e le PLC le saosaoa o le ili e ala i le fesuiaiga o taimi, ma o le vortex flowmeter e fua ai le leo o le ea e maua ai le saʻo o le faʻaogaina o le ea.

10. O le ili faʻaoso faʻaosoina faʻaaogaina le 4-72 anti-corrosion fan ma le maualuga o le ea o le 5000m²/h.

11.Flue kasa post-togafitiga faʻapipiʻiina i se vai efuefu efuefu olo aveesea ma se voluma ea faagasologa o 5000 m²/h

12. E fa'aauupegaina uma auala e tineia ai afi nitrogen ma vai fa'afefeteina mo tagata fa'atau e filifili.

13. Mo suʻega:

Tu'usa'o tulaga'a apefa'i u'amea fua (mm): 500(W) x 3500(H)

Ituaiga apefa'i u'amea lautele lautele (mm): 800(W) x 3500(H)

14. Fa'asao i luga fua (mm): 257(L) x 4.5(W)

15.Touch screen pulea, intuitive ma manino, fa'aeletonika fa'apogai, taimi otometi.

16.O le afi e pulea e le PLC ma faʻatautaia e le paʻi paʻi.

Test box: The experimental device should be a self-standing box with a width of 1000mm, a depth of 2000mm and a height of 4000mm. The bottom of the box should be 300mm above the ground. The perimeter of the test chamber should be sealed, the air from the bottom of the chamber from the front wall (150±10) mm to open a (800±20) mm x (400±10) mm air inlet into the box. A (300±30) mm x (1000±100) mm outlet should be opened at the back of the top of the chamber. Test chamber should be used on both sides of the heat transfer coefficient of about 0.7W.m-2.K-1 thermal insulation, the distance between the steel ladder and the back wall of the test chamber is (150±10) mm, and the bottom rung of the steel ladder is (400±5) mm from the ground. The lowest point of the cable sample is about 100mm from the ground.

• 

   Standard Venturi Blowtorch

• 

   Pua Uila

• 

  Mumu 

• 

  Venturi fa'afefiloi

1. Anemometer: fuaina le saosaoa o le matagi i fafo atu o le pito i luga o le potu suʻega, afai o le savili savili e sili atu i le 8m / s ona le mafai lea ona faia le suʻega.

2. Temperature suʻesuʻe: lua K-ituaiga thermocouples o loʻo faʻapipiʻiina i itu uma e lua o le pusa suʻega, pe afai o le vevela o le puipui i totonu e maualalo ifo nai lo le 5 ℃ pe maualuga atu nai lo le 40 ℃, e le mafai ona faia le suʻega.

3.Air source: adopt touch screen controller, frequency conversion control inlet axial flow fan, can intuitively read out and control the gas flow through the air box for (5000±200) L/min, stable air flow rate during the test.

4. A maeʻa le suʻega: Afai o loʻo mumu pea le faʻataʻitaʻiga pe a uma le itula e tasi o le taofi o le afi, e mafai ona faʻaogaina se masini faʻafefe vai poʻo se masini faʻamaʻi afi afi e mafai ona faʻaogaina faʻamalosi le afi, ma o loʻo i ai se faʻaoga faʻapitoa mo le faʻamamaina o le afi. otaota.

5.Steel ladder type: width (500±5)mm standard steel ladder, width (800±10)mm wide steel ladder, material for SUS304 stainless steel tube.

Tasi tasi mo apefa'i u'amea masani ma lautele

O le aoina o le asu ma le fufuluina o le suauu masini: PP mea, ma le lautele o le 1500mm ma le maualuga o le 3500mm. O le asu aoina olo ua vaevaeina i ni vaega se tolu: masini fa'afefe, masini faamama asu ma pefu, ma masini fa'asu. Fusi masini: ia tuʻuina atu vai faʻafefe mo mea faʻapitoa faamama, e teu ai mea faʻapitoa faʻamama e faamama lelei le asu ma le pefu. Mea e faamama ai le asu ma le pefu: Fa'amama e ala ile inu vai vai, lea e mafai ona fa'amama lelei le asu ma le pefu ina ia avea le asu o le asu pa'epa'e. E fa'aopoopo e le au fa'atau mea faigaluega mo le puipuiga o le si'osi'omaga e tusa ai ma le tulaga.

• 

  Smoke Collection Tower Schematic

• 

  Olo aoina asu

• 

  Fa'aoso ili ata

1.Ignition source type: including one or two band-type propane gas blowtorches and their matching flowmeters and Venturi mixers. The ignition surface is drilled with 242 flat metal plates with a diameter of 1.32mm. The center distance of these holes is 3.2mm, arranged in three rows in a staggered arrangement, each row is 81, 80 and 81, distributed in the nominal size is 257×4.5mm. In addition, a row of small holes are opened on both sides of the flame board, and this guide hole can maintain the stable combustion of the flame.

2.Ignition source location: The torch should be placed horizontally, (75±5) mm from the front surface of the cable sample, (600±5) mm from the bottom of the test chamber, and symmetrical to the axis of the steel ladder. The flame supply point of the blowtorch should be located in the center between the two crossbeams of the steel ladder, and at least 500mm away from the lower end of the sample. The center line of the blowtorch system should be approximately the same as the center line of the steel ladder.

• 

  Vortex Flow Meters mo
  Pulea sa'o ole Volotele ole Ea

• 

  Vortex ea inlet fan

E fa'aogaina le fa'atonuga o le tafega mo le fua sa'o ma le fa'atonutonuina o le tafega tele o le kesi. Mass flow meters o loʻo i ai foliga o le maualuga saʻo, toe faʻaleleia lelei, tali vave, amata vaivai, mautu ma le faʻamaoni, lautele faʻaogaina o le mamafa. Faʻatasi ai ma fesoʻotaʻiga faʻavaomalo faʻavaomalo, e faigofie ona faʻaogaina ma faʻaoga, e mafai ona faʻapipiʻi i soʻo se tulaga, ma faigofie ona faʻafesoʻotaʻi ma se komepiuta mo le pulea otometi.

Fa'ata'ita'iga fa'atekinisi e fa'atonutonu le tafe tele:

1.Accuracy: ±2% F.S

2.Linearity：±1% F.S

3.Repeat accuracy：±0.2% F.S

4.Response time：1 ~ 4 sec

5.Pressure tetee: 3 Mpa

6.Working environment：5 ~ 45℃

7. Faʻataʻitaʻiga faʻaoga: 0- + 5v