FY-NHZ Qalabka Tijaabada Sifada Iska Caabbinta Dabka Cable (Mass Flow Controller)

It is a test equipment used for cables or optical cables required to maintain the integrity of the line in a separate fire test using a flame (controlled heat output) at a temperature of not less than 750°C. Comply with BS6387, BS8491, IEC60331-2009 and other standards.

1.Test station: 1 station, hal muunad imtixaankiiba. Cabbirka Tusaalaha: Dhererka>1200mm.

2.Torch: Tooshka gaaska baalaysan oo leh venturi mixer iyo 500 mm dhererka biiyaha magaca ah.

3.Gas flow range: 0 ~ 50L/min(adjustable)  Gas flow accuracy:0.1L/min

4.Air flow range: 0 ~ 200L/min(adjustable)  Air flow accuracy:5L/min

5.Power supply voltage: AC380V±10%, 50Hz, three-phase five-wire

6.Isticmaalka isha gaaska: LPG ama propane, hawada cufan

7.Flame temperature: 450° ~ 950°(adjustable)

8. Nidaamka dareemayaasha heerkulka: 2 heerkulbeegyada nooca K-ga ah, heerkulka heerkulka 1100 digrii.

9.Awoodda hawlgalka: 3kW

10.Control kursiga tijaabada ee gacanta PLC, hawlgalka shaashadda taabashada, ku habboon oo dareen leh.

11.Gaska socodka mitirka: iyadoo la isticmaalayo xakamaynta qulqulka mass.

12.Short-circuit mode: Qalabkani waxa uu bedelayaa habkii hore ee loo isticmaali jiray fiyuuska,waxana uu qaataa nooc cusub oo ah wareegtada,kaas oo badbaadiya habka caajiska ah ee loo badalo fiyuuska mar kasta.

13.Nidaamka qiiqa wuxuu ku yaalaa dhinaca chassis-ka, kaas oo si wax ku ool ah oo degdeg ah u dami kara gaaska qiiqa, kaas oo hubin kara nuxurka oksijiinta ee sanduuqa inta lagu jiro baaritaanka oo ka dhigaya natiijooyinka baaritaanka si sax ah.

14.Qalabka ogaanshiyaha joogtada ah: Inta lagu jiro tijaabada, hadda waxaa la dhex maraa dhammaan xudunta fiilada, iyo saddexda qalab ee hal-waji ah waxay leeyihiin awood ku filan si ay u ilaaliyaan heerka ugu sarreeya ee dareeraha la oggol yahay ee tamarta tijaabada. Ku xidh laambad silig kasta oo xudunta u ah cidhifka kale ee fiilada, oo ku shub hadda ku dhow 0.11A oo ah danabka la qiimeeyay ee fiilada. Marka muunada la soo gaabiyo/furmo inta lagu jiro tijaabada, dhammaan calaamadaha ayaa soo baxaya.

15.Qalabka wuxuu leeyahay qalabka ilaalinta badbaadada ee soo socda: koronto koronto, ilaalinta wareegga gaaban, ilaalinta xad-dhaafka wareegga wareegga.

1.The equipment test is carried out in a 3 x 3 x 3(m) combustion chamber (customer-supplied), the chamber has the facility to exclude any gas produced by combustion, and there is sufficient ventilation to maintain the flame during the test.

2.Test deegaanka: heerkulka deegaanka dibadda ee qolka waa in lagu hayaa inta u dhaxaysa 5 ℃ iyo 40 ℃.

• 

  Wareegtada

• 

  Shaybaarka Gubashada Refractory

Xakamaynta qulqulka tirada badan

Xakamaynta qulqulka tirada badan waxaa loo isticmaalaa cabbirka saxda ah iyo xakamaynta qulqulka baaxadda gaaska. Mitirka qulqulka massku waxay leeyihiin sifooyin saxsanaan sare leh, soo celin wanaagsan, jawaab celin degdeg ah, bilaw jilicsan, xasillooni iyo isku hallayn, kala duwanaansho cadaadis hawleed ballaaran. Xidhiidhiyayaasha caadiga ah ee caalamiga ah, way fududahay in la shaqeeyo oo la isticmaalo, waxaa lagu rakibi karaa boos kasta, waana sahlan tahay in lagu xiro kombuyuutar si loo xakameeyo otomaatig ah.

Xakamaynta socodka tirada badan ee cabbirada farsamada:

1.Accuracy: ±2% F.S

2.Linearity：±1% F.S

3.Repeat accuracy：±0.2% F.S

4.Response time：1 ~ 4 sec

5. Cadaadiska cadaadiska: 3 Mpa

6.Working environment：5 ~ 45℃

7.Input model: 0-+5v

Shuruudaha wax qabad ee tijaabiyaha, oo ay ku jiraan qaybta tijaabada iska caabbinta dabka (B, cable ama fiber optic cable line integrity tester), tijaabada caabbinta dabka buufinta biyaha iyo tijaabada iska caabinta dabka, ayaa lagu dabaqi karaa fiilooyinka dahaarka ah ee macdanta leh koronto la qiimeeyay oo aan ka badnayn 450 / 750V, hoos xaaladaha ololka muddo dheer si loo ilaaliyo daacadnimada wareegga.

U hoggaansama heerka fiilada dabka u adkeysata ee BS6387 "Qeexidda Shuruudaha Waxqabadka ee fiilooyinka si loo ilaaliyo sharafta wareegga Dhacdada Dabka".

1.Isha kulaylka: 610 mm dheer oo dab-qabad leh oo gaasta tuubada ah oo lagu qasbi karo inuu keeno gaaska.

2. Heerkulka cabbiraadda: heerkulbeeg gaashaaman dhexroor 2mm ah ayaa la dhigayaa meel u dhow meesha hawada laga soo galo, oo la siman gubilaha iyo 75 mm ka sarreeya.

3.Biyo buufiyo: madaxa buufin ayaa lagu dhejiyaa istaashinka tijaabada, sidoo kale wuxuu ku yaalaa badhtamaha gubashada. Cadaadiska biyuhu waa 250KPa ilaa 350KPa, buufin 0.25L/m² ilaa 0.30L/m² biyaha u dhow shaybaarka. Heerkani wuxuu u baahan yahay in lagu cabbiro saxaarad leh qoto dheer oo u oggolaanaysa dhidibkiisa dheer inuu barbar socdo dhidibka fiilada oo la dhigo bartamaha. Saxaradani waxa ay ku saabsan tahay ballac ahaan 100 mm, dhererkeeduna waa 400 mm (qalabka ayaa hoos ka muuqda).

Qalabka Tijaabada Iska caabinta Dabka iyo Biyaha:

Qalabka gariirka:

The vibration device is a low carbon steel rod (25mm in diameter and 600mm in length). The longitudinal section of the rod is parallel to the wall and 200mm above the top of the wall. A shaft divides it into two parts of 200 mm and 400 mm, and the long part faces the wall. Falling from the inclined position to the middle position of the wall from 60°C separated by 30±2s.

Qalabka Tijaabada Biyaha Buufiska iyo Qalabka Tijaabada Jet-biyoodka:

1.Biyo buufinta: ku xir tuubada tijaabada, hubi inaysan jirin wax dhibaato ah oo ku saabsan isku xirka, riix buufinta biyaha si aad u bilowdo, gacanta ku hagaaji nidaamka socodka biyaha "Hagaaji 2" (qulqulkani waa 0-1.4LPM) ee weyn guddi ka mid ah golaha hawlgalka si ay u gaaraan qulqulka dalabka tijaabada.

2.Water jet: Ku xidh birta buufinta ee loo isticmaalo baaritaanka, hubi in aysan jirin wax dhibaato ah oo ku saabsan isku xirka, riix jetka biyaha si aad u bilowdo, gacanta ku hagaaji nidaamka socodka biyaha "Hagaaji 1" (qulqulkani waa 2-18LPM) on guddiga weyn ee golaha hawlgalka si ay u gaaraan socodka baahida imtixaanka.

3.Shaqaynta badhanka wareejinta biyaha siidaynta ayaa lagu daraa barnaamijka: xidh furka biyaha gelitaanka oo riix badhanka furaha siidaynta biyaha si aad u daadiso biyaha hadhay ee dhuumaha. Haddii mashiinku uusan u baahnayn inuu shaqeeyo xilliga qaboobaha, waxaa lagu talinayaa in la saaro isku xirka tuubada oo riix furaha sii deynta biyaha si loo sii daayo biyaha haray gudaha mitirka socodka si looga hortago qaboojinta qalabka.