Qalabka Tijaabada Gubashada FYCS-Z ee Xadhkaha iyo Xadhkaha goostay

Waxay ku habboon tahay in la qiimeeyo awoodda rakibidda toosan ee fiilada iyo fiilada ama fiilada indhaha si loo xakameeyo ololka tooska ah ee ku faafa xaalado cayiman.

U hoggaansan GB18380.31-2022 "Tijaabada guban ee fiilooyinka hoos yimaada xaaladaha ololka Qaybta 3: Ku rakibida toosan ee silig ruxan iyo aaladda tijaabada fidinta fiilada toosan", oo u dhiganta IEC60332-3-10: 2000.

Isla mar ahaantaana si loo buuxiyo shuruudaha Shaxda 4 ee GB/T19666-2019 "Mabaadi'da Guud ee Dabcinta Ololka iyo Xadhkaha Dib u Celinta" heerka.

GB/T18380.32-2022/IEC60332--3--21: 2015 "Tijaabada gubashada ee fiilooyinka korantada iyo fiilooyinka indhaha ee xaaladaha ololka Qaybta 32: Si toos ah loo rakibay iyo ololka fiilada tooska ah ee tijaabada AF / R qaybta".

GB/T18380.33-2022/IEC60332--3--22: 2015 "Tijaabada gubashada ee fiilooyinka korantada iyo fiilooyinka indhaha ee xaaladaha ololka Qaybta 33: Si toosan loo rakibay iyo ololka fiilada tooska ah ee tijaabada qaybta A".

GB/T18385

GB/T18380.36--2022/IEC60332--3--25: 2015 "Tijaabada gubashada ee fiilooyinka korantada iyo fiilooyinka indhaha ee xaaladaha ololka Qaybta 36: Silig xidhmo ah oo toosan iyo ololka fiilada tooska ah ee tijaabada qaybta D".

Qolka tijaabada gubashada, nidaamka xakamaynta korantada, isha hawada, nidaamka xakamaynta qulqulka qulqulka qulqulka qulqulka (gaaska propane iyo gaasta hawada cufan), jaranjarada birta, aaladda dabka deminta, aaladda sifaynta qiiqa, iwm.

1.Working voltage: AC 220V±10% 50Hz,Power consumption: 2KW

2.The inlet and outlet air flow rate: 5000±200 L/min(adjustable)

3. socodka hawada iyo socodka propane waxaa lagu xakameynayaa nidaamka xakamaynta qulqulka qulqulka.

4.Ilaha hawada: propane (0.1Mpa), hawada (0.1Mpa), isha hawada macaamiisha ay leedahay.

5. Waqtiga kala duwan: 0 ~ 60min (waa la dejin karaa)

6.Anemometer measurement range: 0 ~ 30m/s, measurement accuracy: ±0.2m/s

7.Tijaabada qolka cabbirka(mm): 2184(L) x 1156(W) x 5213(H)

Ka buuxsamay dahaarka dabka u adkaysta macdanta, oo leh dusha sare oo leh 1500mm ilaalinta badbaadada sare.

8.2 madax hurdo gubasho leh oo leh isku-darka Venturi

9. Marwaxada soo gelisa hawada waa taageere vortex-ga oo hooseeya. PLC waxay ku xakameysaa xawaaraha marawaxadaha iyada oo loo marayo beddelaha soo noqnoqda, iyo socodka vortex-ka ayaa cabbiraya mugga hawada si loo gaaro xakamaynta mugga gelitaanka hawada saxda ah.

10. Marawaxada qabyada ah ee la kiciyay waxa ay qaadatay 4-72 marawaxad ka hortagta daxalka oo leh mug hawo ah 5000m²/h.

11.daawaynta ka dib gaaska flue waxaa lagu qalabeeyaa munaaradda ka saarida boodhka buufin biyaha leh mugga hawada processing ee 5000 m²/h

12.Labadaba bakhtiinta dabka nitrogen iyo hababka dab-deminta buufinta biyaha ayaa loo qalabeeyay macaamiisha si ay u doortaan.

13. Imtixaanka:

Cabbirka sallaanka birta ee caadiga ah: 500(W) x 3500(H)

Cabbirka sallaanka birta ballaaran ee toosan: 800(W) x 3500(H)

14. Cabbirka dusha gubanaya (mm): 257(L) x 4.5(W)

15.Touch kantaroolka shaashadda, dareen leh oo cad, shid elektaroonig ah, waqti si toos ah.

16.Gubilaha waxaa gacanta ku haya PLC waxaana ku shaqeeya shaashadda taabashada.

Test box: The experimental device should be a self-standing box with a width of 1000mm, a depth of 2000mm and a height of 4000mm. The bottom of the box should be 300mm above the ground. The perimeter of the test chamber should be sealed, the air from the bottom of the chamber from the front wall (150±10) mm to open a (800±20) mm x (400±10) mm air inlet into the box. A (300±30) mm x (1000±100) mm outlet should be opened at the back of the top of the chamber. Test chamber should be used on both sides of the heat transfer coefficient of about 0.7W.m-2.K-1 thermal insulation, the distance between the steel ladder and the back wall of the test chamber is (150±10) mm, and the bottom rung of the steel ladder is (400±5) mm from the ground. The lowest point of the cable sample is about 100mm from the ground.

• 

   Heerka Venturi Blowtorch

• 

   Dalool Toosh ah

• 

  Gubida 

• 

  Isku-darka Venturi

1.Anemometer: wuxuu cabbiraa xawaaraha dabaysha ee ka baxsan qolka tijaabada, haddii xawaraha dabayshu uu dhaafo 8m/s markaas tijaabada lama samayn karo.

2.Temperature probe: laba heerkulbeegyo nooca K ah ayaa ku qalabaysan labada dhinac ee sanduuqa tijaabada, haddii heerkulka gidaarka gudaha uu ka hooseeyo 5℃ ama ka sarreeyo 40℃, tijaabada lama samayn karo.

3.Air source: adopt touch screen controller, frequency conversion control inlet axial flow fan, can intuitively read out and control the gas flow through the air box for (5000±200) L/min, stable air flow rate during the test.

4.Marka la dhammeeyo tijaabada: Haddii shaybaarku uu weli gubanayo hal saac ka dib joojinta dabka, qalabka lagu buufiyo biyaha ama aaladda dab-damiska nitrogen ayaa loo isticmaali karaa si xoog ah loo joojiyo dabka, waxaana jira maro gaar ah oo lagu nadiifiyo dabka. qashin.

5.Steel ladder type: width (500±5)mm standard steel ladder, width (800±10)mm wide steel ladder, material for SUS304 stainless steel tube.

Mid kasta oo loogu talagalay jaranjarooyinka birta caadiga ah iyo kuwa ballaaran

Uruurinta qiiqa iyo dhaqidda aaladda dambaska: walxaha PP, oo leh dhexroor 1500mm iyo dhererka 3500mm. Munaaradda qiiqa ururinta waxay u qaybsan tahay saddex qaybood: qalabka buufinta, qiiqa iyo shaandhada siigada, iyo qalabka qiiqa qiiqa. Qalabka buufinta: si loo siiyo buufinta biyaha alaabta shaandhada gaarka ah, si loo ilaaliyo walxaha shaandhada gaarka ah si loo sifeeyo qiiqa iyo boodhka si wax ku ool ah. Qalabka miiraha qiiqa iyo siigada: Waxaa lagu sifeeyaa walxaha shaandhada biyaha la cabbo, taas oo si wax ku ool ah u shaandhaysa qiiqa iyo siigada si qiiqa ka baxaya uu u noqdo qiiq cad. Macaamiisha waxay ku daraan qalabka ilaalinta deegaanka sida ay xaaladdu tahay.

• 

  Qorshaha Tower ururinta qiiqa

• 

  munaaradda ururinta qiiqa

• 

  Taageere qabyo ah oo la kiciyay

1.Ignition source type: including one or two band-type propane gas blowtorches and their matching flowmeters and Venturi mixers. The ignition surface is drilled with 242 flat metal plates with a diameter of 1.32mm. The center distance of these holes is 3.2mm, arranged in three rows in a staggered arrangement, each row is 81, 80 and 81, distributed in the nominal size is 257×4.5mm. In addition, a row of small holes are opened on both sides of the flame board, and this guide hole can maintain the stable combustion of the flame.

2.Ignition source location: The torch should be placed horizontally, (75±5) mm from the front surface of the cable sample, (600±5) mm from the bottom of the test chamber, and symmetrical to the axis of the steel ladder. The flame supply point of the blowtorch should be located in the center between the two crossbeams of the steel ladder, and at least 500mm away from the lower end of the sample. The center line of the blowtorch system should be approximately the same as the center line of the steel ladder.

• 

  Mitirrada socodka Vortex ee
  Xakamaynta saxda ah ee mugga hawada soo gelaysa

• 

  Mareeyaha hawada soo gelista Vortex

Xakamaynta qulqulka tirada badan waxaa loo isticmaalaa cabbirka saxda ah iyo xakamaynta qulqulka baaxadda gaaska. Mitirka qulqulka massku waxay leeyihiin sifooyin saxsanaan sare leh, soo celin wanaagsan, jawaab celin degdeg ah, bilaw jilicsan, xasillooni iyo isku hallayn, kala duwanaansho cadaadis hawleed ballaaran. Xidhiidhiyayaasha caadiga ah ee caalamiga ah, way fududahay in la shaqeeyo oo la isticmaalo, waxaa lagu rakibi karaa boos kasta, waana sahlan tahay in lagu xiro kombuyuutar si loo xakameeyo otomaatig ah.

Xakamaynta socodka tirada badan ee cabbirada farsamada:

1.Accuracy: ±2% F.S

2.Linearity：±1% F.S

3.Repeat accuracy：±0.2% F.S

4.Response time：1 ~ 4 sec

5. Cadaadiska cadaadiska: 3 Mpa

6.Working environment：5 ~ 45℃

7.Input model: 0-+5v