JT300S Digital Optical Measurement Projector

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ingcaciso yeMveliso

Isixhobo sinokubona ngokufanelekileyo i-contours kunye neemilo ezingaphezulu kweemilo ezahlukahlukeneyo eziyinkimbinkimbi ze-workpieces.Ngokomzekelo: iitemplates, iinxalenye zesitampu, iikhamera, iigiya, ukwenza abasiki, iimpompo kunye nezinye izixhobo, izixhobo kunye neengxenye.Isetyenziswa ngokubanzi kwintsimi yomatshini. , isixhobo, i-electronic, imboni yerabha yokulawula umgangatho, inokuhlola zonke iintlobo zomphezulu kunye nolwandlalo lwemisebenzi enzima, efana nekhamera, i-screw thread, i-gear, yenza i-milling cutter kunye nokunye.Esi sixhobo sisetyenziswa ngokubanzi kwi ukwenziwa koomatshini, izixhobo, imitha kunye neshishini lokubukela kunye nezinye iifektri ezinxulumeneyo kunye namagumbi okulinganisa imigodi kunye neeworkshops.

IParameter yobuGcisa

1.Isikrini somfanekiso

Ubungakanani(mm): φ308

Uluhlu lokujikeleza kwesikrini: 0-360 °

Min. I-engile yokujikeleza: 1′

Ukuchaneka kwe-engile yokujikeleza: 4′

2.Itafile yokusebenza:

Ubungakanani(mm): 320 x 220

Uhambo lwe-X-axis(mm): 0～150 Bonisa ukuchaneka: 0.001mm

Uhambo lwe-Y-axis(mm): 0～50(igxininise)

Ugxininiso kuhambo(mm): 0～75 Bonisa ukuchaneka: 0.001mm

X,Y ulungelelanisa ubonisa ixabiso lokuchaneka: (3+L/75) μm, (L bubude obuMediweyo, iyunithi yi-mm)

3.Ilensi yenjongo:

Ukwandiswa: 10 x (ulungelelwaniso olusemgangathweni) 20 x (Ngokuzikhethela) 50 x (Ngokuzikhethela) 100 x (Ngokuzikhethela)

Imbonakalo yento: φ35mm φ17.5mm φ7mm φ3.5mm

Into Umgama wokuSebenza: 88.376mm 81.375mm 54mm 44.9mm

Impazamo yokwandisa: 0.08%

4.Umthombo wokukhanyisa

Umthombo wokukhanyisa: 24V 150W isibane se-halogen tungsten

Ukukhanya okungathanga ngqo: 24V 150W isibane se-halogen tungsten

5.Umlinganiselo womda(mm): 687(L) x 443(W) x 942(H)

6.Itafile yokusebenza uMax. ukuthwala umthwalo: 15kg

7.Ubunzima: 150kg

Iprofayile yekhampani

I-Hebei Fangyuan Instrument Equipment Co., Ltd. yasekwa ngo-2007 kwaye lishishini lobugcisa obuphezulu obukhethekileyo kwi-R&D, imveliso, intengiso kunye nenkonzo yovavanyo lwezixhobo. Kukho abasebenzi abangaphezu kwama-50, iqela le-R&D lobuchwephesha eliqulunqwe ngoogqirha kunye neenjineli kunye. iingcali zobunjineli. Sizibandakanya kakhulu ekuphuhliseni nasekuveliseni izixhobo zokuvavanya ucingo kunye nekhebula kunye nezinto eziluhlaza, ukupakishwa kweplastiki, iimveliso zomlilo kunye namanye amashishini ahambelanayo. Sivelisa ngaphezu kwe-3,000 yeeseti zezixhobo ezahlukeneyo zokuvavanya unyaka.Imveliso ngoku ithengiswa kumazwe amaninzi anjenge-United States, Singapore, Denmark, Russia, Finland, India, Thailand njalo njalo.

RFQ

Umbuzo: Ngaba uyayamkela inkonzo yokulungelelanisa?

A: Ewe.Asikwazi ukubonelela kuphela ngoomatshini abaqhelekileyo, kodwa kunye noomatshini bokuvavanya obungasifanelanga ngokweemfuno zakho. Kwaye sinokubeka uphawu lwakho kumatshini okuthetha ukuba sinikezela ngenkonzo ye-OEM kunye ne-ODM.

Umbuzo: Yintoni iPackaging?

A: Ngokuqhelekileyo, oomatshini bapakishwa ngebhokisi yomthi. Kuba oomatshini abancinci kunye namacandelo, bapakishwe ngebhokisi.

Umbuzo: Lithini ixesha lokuhambisa?

A: Ngoomatshini bethu abaqhelekileyo, sinesitokhwe kwindawo yokugcina impahla. Ukuba akukho sitokhwe, ngokuqhelekileyo, ixesha lokuhambisa liyi-15-20 iintsuku zokusebenza emva kokufumana idiphozithi (oku kuphela koomatshini bethu abaqhelekileyo). Ukuba unesidingo esingxamisekileyo, siya kukwenzela ilungiselelo elikhethekileyo.

Ukuba unomdla kwiimveliso zethu, unokukhetha ukushiya ulwazi lwakho apha, kwaye siya kuqhagamshelana nawe kungekudala.

Bhala umyalezo wakho apha kwaye uwuthumele kuthi

Iindidi zeemveliso