I-JR-N-16/16S Umshini Wokuhlola Izintambo Nomshini Wokuhlola I-Torsion

Lo mshini uwumshini wokuhlola wokuhlola ukuqina nokunamathela kwezintambo zensimbi ne-aluminium. Isetshenziselwa ukusonta kanye nokukitaza kocingo lwe-aluminium, induku yethusi, intambo yensimbi kanye nocingo oluyinsimbi oluyinsimbi oluyi-aluminium.

Thumela i-imeyili kithi Download as PDF

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

<trp-post-container data-trp-post-id='127'>JR-N-16/16S Wire Winding And Torsion Test Machine</trp-post-container>

Incazelo Yomkhiqizo

Izici

1. Izikhathi zokusebenza zingasethwa futhi zime ngokuzenzakalelayo.
2. I-counterweight iphakanyiswa ngesandla iwintshi, okulula ukuyisebenzisa.
3. Ngemva kokuthi isampula lisontekile futhi liphukile, thinta iswishi encane ukuze urekhode ngokunembile inani lamajika.

Ipharamitha yezobuchwepheshe

1. Intambo ye-Aluminium: Ф3mm ~ 6mm, sebenzisa induku eyinhloko ukuze uyihlole, uma ingaphansi kukaФ3mm, phakamisa ukuyivunguza ngesandla.
2. Intambo yensimbi: ngaphansi kukaФ4mm
3.Copper rod: reverse range:Φ5 ~ Φ10 mm(must be equipped with a special fixture copper rod)
4. Ububanzi obusebenzayo bepuleti lokucindezela ucingo: 80mm, unhlangothi: 200mm
5. Ubude obusebenzayo benduku ewumgogodla: 70mm
6. Isivinini sokusongwa nokusonteka: 1-60 r/ min (esishintshekayo)
7.Ububanzi benduku ewumgogodla:Ф1.25mm,Ф2.25mm,Ф2.75mm,Ф3.0mm,Ф3.5mm, Ф4.25mm, Ф4.75mm,Ф5.0mm,Ф6.75mm,Ф8. 25, Ф9.0mm, Ф11mm, Ф12mm, Ф14mm, Ф17mm, Ф19mm
8. Ibanga lokubala:1 ~ 999999
9.Izisindo ze-Torsion: 7(ama-pcs) x 5kg, 1(ama-pcs) x 2kg,1(ama-pcs) x 0.5kg
10.Dimensions(mm): 950(L) × 500(W) × 1400(H)
11. Amandla emoto: 0.5kW
12. I-voltage elinganiselwe: 220V, 50Hz

Uma unentshisekelo ngemikhiqizo yethu, ungakhetha ukushiya imininingwane yakho lapha, futhi sizokuthinta maduzane.

Bhala umyalezo wakho lapha futhi usithumelele wona

Izigaba zemikhiqizo