FY-NHZ cable ignis resistentia Characteres Test Equipment (Missa O Controller)

It is a test equipment used for cables or optical cables required to maintain the integrity of the line in a separate fire test using a flame (controlled heat output) at a temperature of not less than 750°C. Comply with BS6387, BS8491, IEC60331-2009 and other standards.

1. Testis station: 1 station, one sample per test. Sample size: longitudinem>1200mm.

2.Torch: Torcula gasi propane cum venturi mixer et 500 mm longitudinis exprimens COLLUM.

3.Gas flow range: 0 ~ 50L/min(adjustable)  Gas flow accuracy:0.1L/min

4.Air flow range: 0 ~ 200L/min(adjustable)  Air flow accuracy:5L/min

5.Power supply voltage: AC380V±10%, 50Hz, three-phase five-wire

6.Using gas source: LPG vel propane, compressus aer

7.Flame temperature: 450° ~ 950°(adjustable)

8.Temperate sentiendi systema: 2 chalybs immaculata K-type thermocouples, resistentia temperatus 1100 graduum.

9.Operating potentia: 3kW

10.Control scamnum per PLC imperium, tactus velum operationis, opportunum et intuitivum.

11.Gas fluunt metri: usus massae moderatoris fluunt.

12. Brevis-circuitus modus: Hoc apparatu priorem methodum fuse utendi mutat, et novum genus circuitionis praevaricatoris adoptat, qui taedium reponendi fuse singulis diebus servat.

13. Exhausta ratio in parte gb sita est, quae efficaciter et cito exhaurire gasi potest, quod oxygenii contentum in archa in experimento efficere potest et eventus accuratiores reddere.

14. Continua deprehensio fabrica: In probatione, currens per omnes nucleos funis transit, et tres transformatores singulares sufficientem facultatem habent ad conservandam maximam licitam lacus currentem in tenta intentione. Lucerna unicuique filum nucleum in altero fine dilabi et onerare currentem prope 0.11A in intentione funis aestimatae. Cum specimen breve/per probationem apertum est, omnia signa output sunt.

15. Instrumentum securitatis praesidium habet sequentes cogitationes: potestas copia cultro, brevis circuitus tutela, imperium circuitus oneris tutelam.

1.The equipment test is carried out in a 3 x 3 x 3(m) combustion chamber (customer-supplied), the chamber has the facility to exclude any gas produced by combustion, and there is sufficient ventilation to maintain the flame during the test.

2. Ambitus test: cubiculi temperatus ambiens externus servetur inter 5℃ et 40℃.

• 

  Interruptio potentiae

• 

  Refractory Combustion Laboratorium

Missa O Controller

Massa moderatoris fluere adhibetur pro certa mensura et potestate massae fluxus gasi. Missae metra fluunt altae accurate lineamenta, iterabilitas bona, responsio ieiunium, initium mollis, stabilitas et fides, ampliatio pressionis operativae latae. Cum connexionibus internationalibus vexillum, facile est operari et uti, in quolibet loco institui potest, et facile coniungi cum una PC pro automati potestate.

Missa fluxus moderatoris technici parametri:

1.Accuracy: ±2% F.S

2.Linearity：±1% F.S

3.Repeat accuracy：±0.2% F.S

4.Response time：1 ~ 4 sec

5.Pressure resistentia: III Mpa

6.Working environment：5 ~ 45℃

7.Input exemplar: 0-+5v

Effectus requisita probatoris, inclusa ignis resistentia, pars test (B, cable vel fibra funis opticus linee integritatis combustionis probatoris), aqua aspergine ignis resistentia test et ignis mechanica resistentia test, applicantur ad retinacula mineralia insulatae cum intentione aestimationis 450 non excedente. /750V, sub flamma condiciones diu custodire ambitum integritatis.

Prosequitur vexillum BS6387 cum fune renitente "Requisita Requirements Specification for Cables to maintain Circuit Integrity in the event of Fire".

1. Heat fons: a 610 mm longus gasi turibulum flammeum intensivum tubulosum quod gasi suppeditare cogi potest.

2. Mensura Temperature: 2mm diametri thermometri armatae prope limbum aerem collocatum, turienti et 75 mm supra parallelum.

3. Aqua imbre: caput annectitur imbre test stant, item in medio turibuli. Aqua pressio 250KPa ad 350KPa est, imbre 0.25L/m² ad 0.30L/m*² aquae prope specimen. Haec rate metiri debet cum lance quae satis profunde habet ad longum axem parallelum axi funiculi et in centro positum. Ipsumque fere 100 mm latum et 400 mm longum est (malum infra ostendetur).

Ignis et aqua resistentia Test Fabrica

Vibratio Fabrica:

The vibration device is a low carbon steel rod (25mm in diameter and 600mm in length). The longitudinal section of the rod is parallel to the wall and 200mm above the top of the wall. A shaft divides it into two parts of 200 mm and 400 mm, and the long part faces the wall. Falling from the inclined position to the middle position of the wall from 60°C separated by 30±2s.

Aqua Spray Test Fabrica et aqua Jet Test Fabrica:

1. Aquae imbre: connectere fistulam testam, fac dubium nexum esse, aquam aspergine incipere, manually accommodare ad regulam aquae fluxus "Adjust 2" (0-1.4LPM range) in magnis decuriae operationis arcae ad probationem postulationis perveniunt.

2. Aqua gagates: Collum colligo ad experimentum adhibitum, fac dubium non esse cum nexu, aquam jet incipere, manually accommodare ad regulam aquae fluxus "Adjust 1" (hoc evolutionis est 2-18LPM range) in tabula magna operationis scrinium ut ad experimentum postulatum profluens.

3. Munus aquae emissi bullarum emissi progressioni additur: valvae aquae claude et premere aquam emissio switch button ut reliquam aquam exhauriat in pipeline. Si machina hieme laborare non opus est, suadetur ut fistulam nexum removeat et aquam emissio transibit ad reliquam aquam intra fluens emittere ne instrumenti congelatio prohibeat.