PRODUCTS
PRODUCTS

Discover top-tier Cable Test Equipment for precise diagnostics

RYS-1 Thermal Elongation Test Device(with heat shrink function)

RYS-1 Thermal Elongation Test Device(with heat shrink function)

Apply to IEC60811 standard. It’s to test the elongation and permanent deformation of cable wire’s insulation and cover when in heated and loaded condition. The device is upgraded and equipped with a heat shrinkage test bracket, which is reasonable in structure and easy to use.
View Details View More
HY-1 High Temperature Pressure Test Device

HY-1 High Temperature Pressure Test Device

Suitable for measuring the permanent deformation of the insulation and sheath of wire and cable under heat and load to determine the thermal elongation of the insulation sheath of wire and cable.Used in conjunction with a high-temperature pressure test chamber, it can cause insulation of wires and cables or indentation covered by high temperature and pressure.
View Details View More
XLB-350S Flat Vulcanizing Machine (Water Cooled)

XLB-350S Flat Vulcanizing Machine (Water Cooled)

This machine is suitable for the vulcanization of various rubber and plastic products, and is also widely used in the compression molding of solid plastics, foams, building decoration and decorative products.
View Details View More
Low Temperature Brittleness Test Machine

Low Temperature Brittleness Test Machine

This machine is used to measures the highest temperature of cross-linked polyethylene insulation material and vulcanized rubber when the sample is damaged under impact under specified conditions,which is the brittleness temperature.
View Details View More
HC-2 Oxygen Index Tester

HC-2 Oxygen Index Tester

HC-2 oxygen index tester is developed according to the technical conditions specified in the national standards GB / t2406.1-2008, GB / t2406.2-2009, GB / T 2406, GB / T 5454, GB / T 10707, ASTM D2863, ISO 4589-2. It is mainly used to test the oxygen concentration (volume percentage) of polymer in the combustion process.
View Details View More
JF-3 Digital Oxygen Index Tester(Digital Display)

JF-3 Digital Oxygen Index Tester(Digital Display)

JF-3 digital oxygen index tester is developed according to the technical conditions specified in the national standards GB / t2406.1-2008, GB / t2406.2-2009, GB / T 2406, GB / T 5454, GB / T 10707, ASTM D2863, ISO 4589-2.
View Details View More
GJW-50 Microcomputer-Controlled Voltage Breakdown (Dielectric Strength) Tester

GJW-50 Microcomputer-Controlled Voltage Breakdown (Dielectric Strength) Tester

This machine meets the requirements of IEC60243, IEC554-2, IEC243-1 standards.It is mainly suitable for testing the breakdown strength and withstand voltage time of solid insulation materials such as plastic, film, resin, mica, ceramics, glass, insulating paint and other media under power frequency voltage or DC voltage.
View Details View More
FA2004 Analytical Balance

FA2004 Analytical Balance

Scope of application: scientific research institutes, heavy industry, light industry, chemical industry, laboratories, universities, metallurgy, etc.
View Details View More
FY2021D Electronic Density Balance

FY2021D Electronic Density Balance

Research institute,electronic industry,rubber industry,wire and cable manufacture,food industry,cosmetics industry,paper industry,machining industry,powder metallurgy industry, automobile industry.
View Details View More
RBX-4 Thermal Deformation Measuring Device

RBX-4 Thermal Deformation Measuring Device

This thermal deformation measuring device suitable for measuring thermal deformation index of PVC performance of cable material.
View Details View More
RCJ-2 Thermal Shock Test Device

RCJ-2 Thermal Shock Test Device

Thermal shock test device applies the experimental requirements of thermal shock test in GB/T32129-2015. It is used in conjunction with thermal aging air oven.
View Details View More
Ball Pressure Tester

Ball Pressure Tester

For measuring non-metallic and non-ceramic insulating materials, the maximum measurement temperature is 250 ℃.
View Details View More
JMN-Ⅲ Mooney Viscometer

JMN-Ⅲ Mooney Viscometer

Mooney viscometer is used for the determination of rubber viscosity and vulcanization index. At a certain temperature and pressure, the rotor applies a certain shearing force to the sample with a certain rotating torque, and the machine measures the anti-shearing torque of the rubber. Suitable for reclaimed rubber, rubber, wire and cable industries.
View Details View More
< 1 >
SERVICE

COCO

Marketing Manager

Specialists in test equipment forWire and Cable Industries

E-mail: marlonjiang@fy5117.cn

WhatsApp:008615794567780

SERVICE

Inquire Now