Products-Products-Fangyuan Instrument - Cable Test Machine Supplier

PC36C Direct Current Resistance Measuring Instrument

It meets the requirements of GB/T 3048.4. It is a special equipment for measuring the resistance of wire and cable conductors and an updated product of the double-arm resistance measuring instrument.

View Details View More

PC36C Direct Current Resistance Measuring Instrument

It meets the requirements of GB/T 3048.4. It is a special equipment for measuring the resistance of wire and cable conductors and an updated product of the double-arm resistance measuring instrument.

View Details View More

C-1200/2500 Stranded Conductor Multiplier Clamp Force Resistance Fixture

View Details View More

HWDQ-20TL Conductor Resistance Standard Temperature Measurement Constant Temperature Oil Bath

Quickly stabilize the temperature of the conductor under test

View Details View More

KYR-730 Flame Retardant Tester For Automotive Wires

This instrument is manufactured according to the requirements of national standard QCT-730-2005 "thin-wall insulation low voltage wire used in automobile". The two ends of the sample are fixed and placed in a metal cover with three metal plates at an angle of 45 to the ground. Ignite the blowtorch so that the tip of the blue inner cone touches the surface of the specimen and keeps the torch to the specimen at 90 degrees vertically.

View Details View More

FYLS-17650 Halogen Acid Gas Release Determination Device

This machine is designed and manufactured according to the following standards: 1.GB / T 17650 Test method for gas release from materials of cables or optical cables during combustion: Part 1: Determination of total halogen acid gas Part 2: Determination of acidity of gases by measuring pH and conductivity 2.IEC 60754-1 Ed. 2.0 b: 1994 Test for gases emitted during the combustion of cables-Part 1: Determination of the amount of hydrohalonic acid gas emitted by polymers in cables during combustion. 3.IEC 60754-2 Ed. 1.0 b: 1991 Test for exhaust gas during burning of cables-Part 2: Determination of the acidity of the exhaust gas during burning of materials in cables by measuring pH and conductivity.

View Details View More

DCR-18380 Single Wire and Cable Vertical Burning Test Machine

This instrument is made according to GB/T 18380.11/12/13-2022 version of the latest implementation of the standard, IEC60332-1, JG3050, JB / T 4278.5, BS, EN test standards. The two ends of the sample are fixed and placed vertically in a metal cover with metal plates on three sides.

View Details View More

DCR-18380Z Single Wire and Cable Vertical Burning Tester

This instrument is made according to GB/T 18380.11/12/13-2022 version of the latest implementation of the standard, IEC60332-1, JG3050, JB / T 4278.5, BS, EN test standards. The two ends of the sample are fixed and placed vertically in a metal cover with metal plates on three sides.

View Details View More

FY-NHZ Cable Fire Resistance Characteristics Test Equipment(Mass Flow Controller)

It is a test equipment used for cables or optical cables required to maintain the integrity of the line in a separate fire test using a flame (controlled heat output) at a temperature of not less than 750°C. Comply with BS6387, BS8491, IEC60331-2009 and other standards.

View Details View More

FY-3000A/5000A Cable Load Burning Tester

This machine is developed and manufactured according to the test methods and judgment rules of MT818-2009 and MT 386-2011 for flame retardancy of coal mine flame retardant cables.Automatic programmed control, touch screen operation, experimental results can be selectively saved, ignition sensing control safety function.The shell is made of high-quality 304 stainless steel, easy to operate and high integration.

View Details View More

Wire and Cable Smoke Density Test Machine

Comply with GB/T17651.1~2, IEC61034-1~2. The determination of smoke density is an important aspect of assessing the burning characteristics of cables or optical cables, which is related to the evacuation of personnel and the ability to approach the determination of fire fighting.This instrument is mainly used to determine the concentration of smoke released when the cable and optical cable are burned under specific conditions, and to verify the density of smoke produced. Under flame burning or flameless burning conditions, light transmittance is used as a way to compare different cables or optical cables under specific conditions.

View Details View More

FYCS-Z Wire and Cable Bunched Burning Test Equipment (Mass Flow Controller)

It is suitable for evaluating the ability of vertical installation of bundled wire and cable or optical cable to suppress vertical flame spread under specified conditions.

View Details View More

FDW-LJC Low Temperature Automatic Intelligent Test Machine (Winding,Stretching,Impact)

The machine meets UL standard and GB/T2951 standard of low temperature drawing, low temperature winding, low temperature impact test standard.

View Details View More

XP-19T Wire and Cable Chipping Machine

This machine is suitable for GB / T2951 / IEC60811 test standard requirements, and is an indispensable sample preparation equipment for wire and cable tests.

View Details View More

DCX-130 Cross-linked Electric Core Punching Machine

This machine is a special equipment for removing metal wire cores without damaging the insulation layer. It is a sample preparation supporting equipment for the structural size detection of cable insulation cross-section and the thickness detection of conductor shielding.

View Details View More

HY-1 High Temperature Pressure Test Device

View Details View More

XP-19 Chipping Machine

This machine is suitable for IEC60811 test standard requirements, and is an indispensable sample preparation equipment for wire and cable tests.

View Details View More

FY450 High Temperature Pressure Test Chamber

It meets the test requirements of national standard IEC60811. The test is automated. After setting the heating time and spraying time, it is automatically completed and shut down.The device adopts a six-station structure to increase the test quantity each time.

View Details View More