Mochini oa Teko oa Teko ea Mosi le Mosi oa Teko

Latela GB/T17651.1~2, IEC61034-1~2. Boikemisetso ba boima ba mosi ke karolo ea bohlokoa ea ho hlahloba litšobotsi tse tukang tsa lithapo kapa lithapo tsa optical, tse amanang le ho tlosoa ha basebetsi le bokhoni ba ho atamela boikemisetso ba ntoa ea mollo. e lokolloa ha thapo le thapo ea optical li chesoa tlas'a maemo a itseng, le ho netefatsa boima ba mosi o hlahisoang. Tlas'a maemo a tukang kapa a se nang mollo, phetisetso ea leseli e sebelisoa e le mokhoa oa ho bapisa likhoele tse fapaneng kapa likhoele tsa optical tlasa maemo a itseng.

Sesebelisoa sena se kenyelletsa tsebo ea litsebi likarolong tse tharo tsa mechine, optics, le lisebelisoa tsa elektronike. Ke sehlahisoa sa motsoako oa electromechanical se nang le sebopeho se utloahalang, ts'ebetso e tsitsitseng, le ts'ebetso e bonolo. WINDOWS 10 segokanyimmediamentsi sa sebolokigolo, mokhoa oa LabVIEW, le mokhoa o phethahetseng oa tšireletso. Nakong ea tlhahlobo, liphetho tsa litekanyo li bonts'oa ka nako ea 'nete' me lekhalo le phethahetseng le huleloa ka matla (ho bonts'a phetiso le nako ea nako). Lintlha li ka bolokeha ka ho sa feleng, tsa baloa le ho hatisoa, 'me tlaleho e ka hatisoa ka ho toba.

The smoke density optical measurement system of the cable or optical cable burning under specific conditions is composed of a light source, a silicon photocell, a light source receiver and a computer system.The light generated by the light source passes through the smoke density laboratory of 3 × 3 × 3(m) to form a uniform beam with a diameter of 1.5m±0.1m on the wall opposite the light source. The photocell installed at the center of the beam detects the intensity of the beam from the light source. When a large amount of smoke is generated in the combustion chamber due to burning cables or optical cables, the smoke absorbs a part of the photoelectricity, and the intensity of the beam reaching the silicon photovoltaic cell is weakened. By processing the data through the computer system, it can be calculated that it is 100% relative to the initial Linear response light transmittance.

Sesebelisoa sohle se na le kamore ea ho etsa liteko e koetsoeng, mokhoa oa ho metha oa photometric, terei ea joala, sistimi e tukang, setena, lebokose la liteko, sets'oants'o sa cable, sesebelisoa sa ho metha mocheso le software ea tlhahlobo ea mosi. Potoloho e hlahisoa ke microcomputer e le 'ngoe, e nang le litaba tse phahameng tsa tekheniki le ts'ebetso e tsitsitseng. Sesebelisoa sena se loketse lithapo tsohle mme se sebelisoa haholo ke lifeme tsa tlhahiso ea indasteri ea terata le lithapo hammoho le mafapha a lipatlisiso le liteko tsa saense. Lebokose la teko ke cube ea teko e nang le bophahamo ba 27m³.

1.Combustion chamber: internal dimensions: 3 × 3 × 3(m) total 27 cubic meters. It can be a brick wall structure or a steel plate structure, which can be chosen by customers.

2.Sesebelisoa sa ho metha leseli:

   A. Mohloli oa leseli o tsoa kantle ho naha lebone la halogen la quartz: matla a lebitso 100W, motlakase oa lebitso: 12V, khanya e khutlisetsang khanya: 2000 ~ 3000Lm. 

   B.Receiver: silicon photovoltaic cell, 0% leseli la ho fetisoa ha leseli le bolela hore ha ho na leseli le fetang, 100% e fetisa leseli le bolela hore leseli le feta ka ho feletseng ntle le ho thibela.   

3. 3.Mehloli e tloaelehileng ea mollo

   Mohloli oa A.Fire ke joala ba 1.0 L.

   B. Terei ea joala: tšepe e sa hloekang, tlase 210 x 110(mm), holimo 240 x 140(mm), bophahamo 80mm

4.Mixing of smoke: Use a desktop fan to make the smoke evenly distributed in       the combustion chamber.

5.Blank test: Burning alcohol lamp makes the temperature of the combustion chamber reach 25±5℃.

6. Sesebelisoa sa ho lekanya mocheso: mochine oa mocheso o kenngoa ka bolelele ba 1.5m ho tloha ka hare ho lemati ho ea fatše le 0.5m ho tloha leboteng.

7.Setsi sa software ea ho lekanya phetisetso e kenyelelitsoe, e ka hlahisang li-curves le litlaleho.

8.Ho kenyeletsoa komporo (ho sa kenyelelitsoe printa)

9.Matla: 220V, 4kW

10.(Boima ba mosi) 0 ~ 924 lebelo la othomathiki la lebelo le tšeletseng

11.Mekhahlelo ea ho lekanya: 0.0001 ~ 100%

12.Measurement accuracy: ±3%

13.Ho sebetsa matla: 200 ~ 240V, 50Hz

14.Ambient mocheso: mocheso kamoreng ~ 40 ℃

15.Relative temperature: ≤85%

16.Tikoloho ea ho sebetsa: Ha sesebelisoa se ntse se sebetsa, se lokela ho qoba leseli le tobileng 'me ho se ke ha e-ba le moea o qobelloang.

17.Monyako o ka pele o na le fensetere le thebe e khanyang e khanyang e khonang ho thibela pono.

18.Square box bottom e kenyelelitsoe ka sesebelisoa sa ho khantša ka mokhoa o itekanetseng, holimo ho kenngoa ka lebokose la mochine oa ho fetola khatello ea ka hare.

19.Mohloli oa leseli: 12V lebone la incandescent, leqhubu le khanyang 400 ~ 750nm

20.Combustion system: e na le valve e laolang khatello, sefahla, flowmeter ea valve ea regulator, burner.

21.Burner: e nang le setei le terei ea joala, e behiloeng bohareng ba sampole.

1.Komporo ea komporo (e nang le pontšo): 1 pc

2.Analysis software: 1 sete

Lense ea 3.Calibration: 3 pcs

4.Tlhaloso ea bulb: 1 pc

5.Operating Litaelo

6.Setifikeiti sa ho lumellana