SY-201 Mine Cable Transition Resistance Tester

Product Detail

Product Tags

Product Description

The SY-201 type mining cable transition resistance tester is a new generation of transition resistance intelligent testing instrument that improves on traditional transition resistance testers, small current resistance testers, low resistance testers, etc., using digital intelligent measurement methods. It is a cost-effective choice for enterprises related to wires and cables, conductive materials, and various testing institutions to measure transition resistance, wire and cable wire resistance, and various resistor resistance.

Standards:MT818-2009 and GB/T12972-2008.

Functions and Features

1)The instrument can achieve resistance measurement with an accuracy of 0.5% between 1 Ω -- 2M Ω.
2)Measurement results are automatically saved and can be queried at any time, and a maximum of 200 groups of data can be saved.
3)Provide calibration function, which can use standard resistors for digital calibration to ensure consistency between measured display values and standard values. Eliminate the concern of using traditional resistance testing equipment that may cause deviations due to electronic device aging and cannot be corrected.
4)There are a total of seven levels of automatic shift prediction between 1 Ω and 1MΩ, which automatically selects the appropriate gear for measurement without the need for manual selection.
5)0.001mA-5mA total 5 levels of current automatic switching. Provide constant current source/voltage measurement
6)The instrument has an automatic discharge protection function to prevent static electricity from testers and test samples from damaging the instrument equipment during wiring.
7)12864 LCD display, touch buttons, Chinese menu parameter settings.
8)Intelligent measurement, only press the measurement button during measurement.

Technical Parameter

1.Transition mode measurement index (2-clip test line)

Measurement range: 1Ω-2MΩ

Measuring current: 0.001mA, 0.01mA, 0.1mA, 1mA, 5mA total 5 levels

Minimum resolution: 1mΩ

Measurement accuracy: ± 0.5%

(Most gears can achieve an accuracy of ± 0.05% using a 4-clip test line)

2.Output of constant current source: the same as the measurement current

3.Measuring method: four terminals combined with double test clips

4.Data storage: 200 items

5.Dimensions(mm): 258(W) x 106(H) x 206(D)

Measurement range	1 Ω -2.5M Ω(7 gears)
Minimum Resolution	0.1mΩ
Range	Measurement range	Resolution	Accuracy level
1Ω	0-2.5Ω	0.1mΩ	0.5
10Ω	2.5Ω-25Ω	1mΩ	0.2
100Ω	25Ω-250Ω	10mΩ	0.05
1KΩ	250Ω-2.5KΩ	100mΩ	0.05
10KΩ	2.5KΩ-25KΩ	1Ω	0.05
100KΩ	25KΩ-250KΩ	10Ω	0.2
1MΩ	250KΩ-2.5MΩ	100Ω	/
Dimensions(mm)	258(W) x 106(H) x 206(D)

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.

Write your message here and send it to us

Products categories